Ref. 24730-0.6
Bevel milling cutter
BEVEL-MILLING-CUTTER-Z:3-FOR-MACHINE-701S-CARBIDE-E25UF
Solid carbide E25UF — 3 flutes, radius R0.1, Ø 0.6 mm
Swiss Made
ULTRAFINE GRADE High-end grade with very high hardness and toughness for micro-machining
Tool angles lambda 0° gamma 8°
Chamfer tool
Side only cut
Cutting length
Specifications
Dimensions
| Diameter (D) | 0.6 mm |
| Shank diameter (d) | 6 mm (h5) |
| Overall length (L) | 33 mm |
| Cutting length (l1) | 33 mm |
| Number of flutes (Z) | 3 |
| Radius (R) | 0.1 mm |
| Length (L3) | 2 mm |
| w° collision angle | 11.4° |
Material & geometry
| Grade | E25UF |
| Grain size | < 0.4 µm |
| Hardness | 1750 HV30 |
| Coating | Uncoated (raw) |
Material compatibility
●●● Excellent (3/3)
●●○ Good (2/3)
●○○ Possible (1/3)
○○○ Not recommended
| Category | Material | Specification | Grp | 24730-0.6 | Actions |
|---|---|---|---|---|---|
| Alloyed and non-alloyed steelsNon-alloyed steels | Rm < 450 N/mm² | 1a | ●○○ 1/3 | Calculate | |
| Rm 450–700 N/mm² | 1b | ●○○ 1/3 | Calculate | ||
| Rm 700–900 N/mm² | 1c | ●○○ 1/3 | Calculate | ||
| Rm > 1200 N/mm² | 1d | ○○○ 0/3 | |||
| Stainless steelsStainless steels | Rm < 650 N/mm² | 2a | ●○○ 1/3 | Calculate | |
| Rm 650–950 N/mm² | 2b | ●○○ 1/3 | Calculate | ||
| Rm > 950 N/mm² | 2c | ○○○ 0/3 | |||
| Hardened steelsHardened steels | 44–56 HRC | 3a | ○○○ 0/3 | ||
| 57–67 HRC | 3b | ○○○ 0/3 | |||
| Exotic materialsSpecial alloys | < 32 HRC | 4a | ○○○ 0/3 | ||
| > 32 HRC | 4b | ○○○ 0/3 | |||
| GraphiteIndustrial graphite | 5 | ●○○ 1/3 | Calculate | ||
| Cast ironGrey / nodular cast iron | < 32 HRC | 6a | ○○○ 0/3 | ||
| > 32 HRC | 6b | ○○○ 0/3 | |||
| TitaniumTitanium alloys | Rm < 600 N/mm² | 7a | ●○○ 1/3 | Calculate | |
| 600 < Rm N/mm² | 7b | ●○○ 1/3 | Calculate | ||
| Nickel alloysInconel, Hastelloy | Rm < 1000 N/mm² | 8a | ○○○ 0/3 | ||
| Rm > 1000 N/mm² | 8b | ○○○ 0/3 | |||
| Copper, brass, bronzeCopper-based | Rm < 850 N/mm² | 9a | ●●● 3/3 | Calculate | |
| Rm > 850 N/mm² | 9b | ●●● 3/3 | Calculate | ||
| AluminumAluminum alloys | Si < 0.5% | 10a | ●●● 3/3 | Calculate | |
| 0.5% < Si < 5% | 10b | ●●● 3/3 | Calculate | ||
| Si > 5% | 10c | ●○○ 1/3 | Calculate | ||
| Synthetic materialsEngineering plastics | Thermoplastic | 11a | ●●● 3/3 | Calculate | |
| Thermoset | 11b | ●●● 3/3 | Calculate | ||
| Composite materialsReinforced composites | Glass fiber / GFK | 12a | ●○○ 1/3 | Calculate | |
| Carbon fiber / KFK | 12b | ●○○ 1/3 | Calculate | ||
| Precious metalsGold, platinum, silver | Gold | 13a | ●●● 3/3 | Calculate | |
| Platinum | 13b | ●○○ 1/3 | Calculate |
Available coatings
BEVEL-MILLING-CUTTER-Z:3-FOR-MACHINE-701S-CARBIDE-E25UF
24730-0.6
Downloads
Dimensions
| D (Ø / d.01) | 0.6 mm |
| d (h5) | 6 mm |
| L total | 33 mm |
| l1 usable | 33 mm |
| l3 | 2 mm |
| R | 0.1 mm |
| Z flutes | 3 |
| w° collision angle | 11.4° |
Scan for EziCut